We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Stalk Interface Peugeot & Citroen > 02
This stalk control is specifically for Peugeot and Citroen vehicles with a mini ISO connector.
- Citroen Xantia 1993-2003
- Citroen Xsara 1997-2005
- Fiat Ulysse 1994-2002
- Peugeot 306 1993-2001
For the installation manual please see the 'Product Attachments' Tab.
For any additional information you may require please see the 'Technical Tips' tab.
What is a stalk control?
If you're looking to replace your car radio with a new aftermarket stereo then you'll most likely need some form of wiring loom to ensure everything plugs together without cutting any wires. The basic way to do this is with an ISO lead which will power the unit, connect the factory speakers and allow full function using the stereo controls. However, if you want to retain the separate stalk or steering wheel controls of your car then you require a stalk adaptor lead.
As with most car wiring the various plugs and connectors are specific to a manufacturer, model and year. To find out which connector is suitable for your vehicle you should begin by using our vehicle product finder or registration lookup. With any luck your particular vehicle will only display one possible stalk adaptor making the choice easy. However some vehicle models can be fitted with a variety of wiring connectors or audio systems making it difficult to pinpoint exactly which will fit. In these instances it is important to check the descriptions of the various stalk controls and see where they differ. If they are for different audio systems then pick the one that fits the system you have in the vehicle. If the connectors are different then you will need to pop the factory stereo out of your car and manually check which one will plug in.
In addition to the stalk control you will require a patch lead specific to the make of aftermarket headunit you are fitting. Simply check the related products section and pick the patch lead for the correct manufacturer, we supply all major brands including Sony, Alpine, Kenwood and Pioneer so you should be covered.
NB - You may notice products with the same part number just one has an A on the end. These have the same connectors and work with the same audio systems, they differ because they come from different factories. We take supply from both to ensure we can provide solutions for as many vehicles as possible, each factory filling the gaps in the others range.
| Colour | Black |
|---|---|
| Connection | Mini ISO |
| Cable Length (m) | 0.1 |
| Brand | Celsus |
| EAN | 5055164413215 |
| Compatible Vehicles | Citroen Xsara 1997-2005 Fiat Ulysse 1994-2002 Peugeot 306 1993-2001 |
| Task | Replace Headunit |
Write Your Own Review
This stalk interface is suitable for vehicles with the 4 function stalk and display built into the original radio. It uses a yellow mini ISO plug.
On most French cars you have to install the steering control interface when the vehicle is asleep
- Get in the vehicle with the OEM radio still installed
- Close all the doors and turn off any interior lights
- Do not open the doors or switch anything on for 10 minutes
- The OEM radio can then be removed
- Do the installation while the vehicle is in sleep mode
- Once installed switch on and test
When using this interface with either a Sony, Pioneer or VDO radio you will need to cut the black ground wire. There is a label on the interface indicating the appropriate wire. Please remove the interface from the vehicle before cutting the wire.
