We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Solo-Baric L7S 10" Square Dual Voice Coil Subwoofer - 2 Ohm
The KICKER® Solo-Baric® L7S™ is the original square sub. It handles plenty of power with special thermal management systems. You get tons of bass without distortion or compromising on sound quality.
The Solo-Baric's cutting-edge, square-sub design means more cone area, more air displacement and more volume than a round woofer.
Spec:
- 10 inch
- Dual Voice Coil - 2 ohm
- RMS Power: 600W
- T/S Parametres here
Features:
- Injection-Moulded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKon™ 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminium Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
Dimensions:
- Mounting Depth: 12.1cm
- Mounting Cutout (Square): 18.4cm
- More detailed dimensions here
- Sealed enclosure spec: (14.2L - 21.2L)
- Ported enclosure spec: (18.6L - 28.3L)
| Style | Normal |
|---|---|
| Impedance (Ohms) | Dual 2 |
| Voice Coils | Dual |
| RMS Power (W) | 600 |
| Peak Power (W) | 1200 |
| Sensitivity (dB @ 1W/1m) | 85.87 |
| Frequency Response (Hz) | 24-500 |
| Height (cm) | 27.1 |
| Width (cm) | 27.1 |
| Depth (cm) | 18.4 |
| Protrusion (cm) | 2.5 |
| Mounting Depth (cm) | 15.9 |
| Mounting Hole Diameter (cm) | 23.7 |
| Grills | N/A |
| Recommended Minimum Power Handling (W) | N/A |
| Recommended Maximum Power Handling (W) | 600 |
| Recommended Box Volume Sealed (Litres) | 28.32-35.4 |
| Recommended Box Volume Ported (Litres) | 35.4-63.7 |
| Brand | Kicker Audio |
| EAN | 713034079071 |
| Box Quantity | 1 |
Write Your Own Review
Every subwoofer requires a certain amount of power (W) to play to its full potential. Please see below information on the recommended amplifier power for this specific subwoofer. Remember that this is power at the working impedance (Ω). If you require assistance on matching a subwoofer to an amplifier then please contact one of our recommended installers.
