FASCIA Saab 93 double DIN 05 >

This fascia is specifically designed to fit Saab 93 models. To confirm that this is the fascia you require please use the What Fits My Car page.

This fascia is a double DIN fascia with an additional pocket, meaning that you can fit double DIN or single DIN stereo without any other accessories. This will also accept a double ISO stereo with an additional ACG5040 cage.

Compatible Vehicles

• Saab 9-3 YS3F Facelift 2005-2013

Removing the factory radio:
Simply unclip and remove the airvents above the radio, these can be extremely tight so use a plastic trim tool. Once removed, there are two torx screws either side of the radio which will need removing. The radio is now free to be fully removed.

A vehicle's dashboard is the focal point of the entire interior, car manufacturers therefore go to great lengths to ensure it looks stylish and innovative. That is all well and good until you want to upgrade the factory radio to a new aftermarket stereo. Alongside the necessary wiring adaptors Celsus provide fascia plates, plastic surrounds that sit around an aftermarket stereo and neatly match the original vehicle dash.

Aftermarket stereos come in three sizes: single DIN, double DIN and double ISO. All three are the same width, approximately 180mm, but the height differs. Single DIN radios are approximately 50mm high while double DIN and double ISO are twice that at around 100mm. Double DIN and double ISO stereos are the same, but the cages supplied with them have different heights of 103mm and 113mm respectively.