FASCIA BMW 1 & 3 Series 04 >

This fascia is specifically designed to fit BMW 1 & 3 Series models. To confirm that this is the fascia you require please use the What Fits My Car page.

This fascia is a single DIN fascia meaning that you can only fit single DIN stereos.

Compatible Vehicles

• BMW 1 Series E81, E82, E87, E88 2004-2010
• BMW 1 Series F20, F21 2011-2019
• BMW 3 Series E90, E91, E92, E93 2006-2012
• BMW X1 E84 2009-2015
• BMW Z4 Roadster E89 2009-2016

Removing the factory radio:
Use a large flat blade trim tool and gently release the aircon unit directly under the radio. Pull it forward and remove the connecters on the rear of the air con module. Undo the 2 torx screws securing the radio in place, once removed the radio will be free to fully remove. Unclip the quadlock and fakra connections at the radio

A vehicle's dashboard is the focal point of the entire interior, car manufacturers therefore go to great lengths to ensure it looks stylish and innovative. That is all well and good until you want to upgrade the factory radio to a new aftermarket stereo. Alongside the necessary wiring adaptors Celsus provide fascia plates, plastic surrounds that sit around an aftermarket stereo and neatly match the original vehicle dash.

Aftermarket stereos come in three sizes: single DIN, double DIN and double ISO. All three are the same width, approximately 180mm, but the height differs. Single DIN radios are approximately 50mm high while double DIN and double ISO are twice that at around 100mm. Double DIN and double ISO stereos are the same, but the cages supplied with them have different heights of 103mm and 113mm respectively.