10" TW1 Thin-line Subwoofer 300W @ 4 Ohm

More Due
SKU
JL10TW1
Views: 26
£284.99 £237.49
Next day, tracked delivery
Free delivery on qualifying orders
SAFE & SECURE PAYMENTS POWERED BY

TW1 10-inch Subwoofer (300 W, 4 Ω)

Built on JL Audio's patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 litres). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.

JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a "concentric tube" structure built into the injection-moulded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.

The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.

Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.

  • Very shallow mounting depth (4.36 in / 111 mm)
  • No pole vent: permits mounting close to rear wall of enclosure
  • Extremely small sealed enclosure volume requirements
  • Long linear excursion capability (0.40 in / 10 mm, one-way)
  • DMA-optimized motor design
  • Patented "concentric tube" architecture
  • Patented "floating cone attach method" technology
  • Cast alloy frame with flat edges for tight driver grouping
  • Injection moulded, mica-filled polypropylene cone
  • Rubber surround
  • Steel mesh grille included with each driver
  • Precision-built in USA at JL Audio's Miramar, Florida factory with global components
More Information
StyleRound
Shallow
Impedance (Ohms)4
Voice CoilsSingle
RMS Power (W)200
Peak Power (W)300
Sensitivity (dB @ 1W/1m)82.2
Frequency Response (Hz)N/A
Height (cm)26.4
Width (cm)26.4
Depth (cm)13.3
Protrusion (cm)2.2
Mounting Depth (cm)11.1
Mounting Hole Diameter (cm)23
GrillsIncluded
Recommended AmplifierJLJD500/1
JLRD500/1
JLMX500/1
Recommended Minimum Power Handling (W)75
Recommended Maximum Power Handling (W)300
Recommended Box Volume Sealed (Litres)9.91
Recommended Box Volume Ported (Litres)17.7
BrandJL Audio
EAN8714505040059
Box Quantity4

Every subwoofer requires a certain amount of power (W) to play to its full potential. Please see below information on the recommended amplifier power for this specific subwoofer. Remember that this is power at the working impedance (Ω). If you require assistance on matching a subwoofer to an amplifier then please contact one of our recommended installers.

10TW1 Recommended Amplifier Power

All of our items are backed by our enjoyment guarantee, if you aren’t 100% happy with your purchase then we will accept it back for a refund or exchange.

If the item is faulty or different from advertised then the shipping is on us. However, if the item is no longer required or just ordered incorrectly then we can refund you for the item, but you will be charged for getting it back to us.

For a full explanation of the returns process please see our Returns Policy.